Due to a lot of work and other personal stuff i have not been so active, but i have started to working on AO Shooting Game 3.0 šŸ™‚ And it’s going to be a big improvment.

Let me give you some information.
The hole system will building on Arduino but also on Raspberry PI, yes that is correct.
The PI computer will hold a webpage that you control everything in. No buttons (just powerbutton) and an 12v battery to make it portable.

It will open up to make it possible to have “unlimited” amount of targets. Everything will be controlled thru a webpage that you add the sensors.

So how does this work ? Well to the Raspberry pi there will be an arduino connected, but that arduino will only have the NRF transmitter connected. The PI computer will communicate thru serial port and give commands to the arduino, to start games, add sensors etc.

The vibration sensors will also be changed to a new one (but you can use the old ones) infact the wireless will be almost the same, a new code that is improved, they will be powered with an lithium battery that can be recharged and skip the arduino board and only use the chip.

So will there be an memory in the main arduino ? No, on the powerup, the Raspberry pi will send out the transmitter ID numbers to the sensors, thru serial, it’s simple. And then give them a test communication.

Then you control the hole system thru the raspberry pi touch screen.
Im going to head in and do a lot of programming and testing for this system, and write here during the hole process.

The terminal printer will be running thru the Raspberry Pi also.

Stay tune for some updates.